 |
|
|
|
|
American Pool Table Cloth
|
|
|
|
|
|
|
|
|
Displaying 1 to 4 (of 4 products)
Pages: |
|
|
|
|
|
|
|
 |
|
£2.49 Ex VAT
£2.99 Inc VAT
|
| Snooker / Pool Table Cloth Mending Plaster (5 Pack). These handy little plasters are the perfect quick fix accessory for repairing your expensive table cloth. If your Pool or Snooker Table develops any cuts or tears these plasters have been designed as a temporary fix until you have your table recovered allowing you to still play. These are a very affordable solution for repairing your expensive cloth. Features: Strong self adhesive peel off backing. Easily trimmed with scissors for smaller repairs. Dimensions: 7cm x 7cm. |
 |
|
£10.83 Ex VAT
£13.00 Inc VAT
|
| Ambersil HS 300 High Strength Spray Adhesive. Technical Data: Spray Adhesive HS 300 is a high strength adhesive, formulated without Methylene Chloride or other chlorinated solvents. Advantages: High strength formulation. Longer open bond time - allows large areas to be covered before film dries. Economical, good coverage. Free from chlorinated solvents. Spray Adhesive HS 300 will provide high-strength bonds in many different areas: Applications: Chipboard and Concrete. Insulation Materials. Canvas and Leather. Paper, Wood and Cork. Metal, Plastic and Rubber. Apply an even coating to both surfaces to be bonded from 9” - 12” (25 - 30cm). Wait until the adhesive is tack-dry and bond the surfaces together using firm pressure. N.B. May affect certain plastics. Always test a small, inconspicuous area before general use. To prevent blockages, invert the can after use and spray to clear the nozzle. Technical Data: Appearance: Clear, amber liquid. Odour: Acetone. SG @ 25°C: 0.68. Pressure @ 25°C: 3 Bar. Discharge rate: 1.7 g/sec. Polymer type: Styrene Isoprene Copolymer. Tack time: Approximately 2-10 minutes. Bonding time: Maximum adhesion in 12/24 hours. Temperature range: Up to 50°C (dried film). Solubility: Soluble in some solvents, insoluble in water. Recommended solvents: Amberklene FE10, ME20 and L030. Flammability: Classified as extremely flammable under CHIP Regulations. Packaging: 500ml aeros. Storage: The product may be stored at normal ambient temperatures and has... |
|
|
£10.83 Ex VAT
£13.00 Inc VAT
|
| Ambersil HS 300 High Strength Spray Adhesive. Technical Data: Spray Adhesive HS 300 is a high strength adhesive, formulated without Methylene Chloride or other chlorinated solvents. Advantages: High strength formulation. Longer open bond time - allows large areas to be covered before film dries. Economical, good coverage. Free from chlorinated solvents. Spray Adhesive HS 300 will provide high-strength bonds in many different areas: Applications: Chipboard and Concrete. Insulation Materials. Canvas and Leather. Paper, Wood and Cork. Metal, Plastic and Rubber. Apply an even coating to both surfaces to be bonded from 9” - 12” (25 - 30cm). Wait until the adhesive is tack-dry and bond the surfaces together using firm pressure. N.B. May affect certain plastics. Always test a small, inconspicuous area before general use. To prevent blockages, invert the can after use and spray to clear the nozzle. Technical Data: Appearance: Clear, amber liquid. Odour: Acetone. SG @ 25°C: 0.68. Pressure @ 25°C: 3 Bar. Discharge rate: 1.7 g/sec. Polymer type: Styrene Isoprene Copolymer. Tack time: Approximately 2-10 minutes. Bonding time: Maximum adhesion in 12/24 hours. Temperature range: Up to 50°C (dried film). Solubility: Soluble in some solvents, insoluble in water. Recommended solvents: Amberklene FE10, ME20 and L030. Flammability: Classified as extremely flammable under CHIP Regulations. Packaging: 500ml aeros. Storage: The product may be stored at normal ambient temperatures and has... |
 |
|
£72.00 Ex VAT
£86.40 Inc VAT
|
| SuperPro™ Professional quality fine worsted cloth for high end American pool and Russian Pyramid tables. Treated with SpillGuard™ to protect against stains and spills. Specifications : Weight: 390g/m2 (20oz/yd @ 63") Colour: Olive Green Blue Red Burgundy Purple Black Electric Blue Tournament Blue Camel MILLIKEN AMERICAN POOL TABLE CLOTHS SuperPro is Milliken’s premium worsted cloth. This highly rated brand maintains its play characteristics longer than other premium cloth, giving control, consistency and the confidence players require to produce a championship winning performance. Milliken combines finest quality yarn and over 100 years’ experience to produce a highly engineered finish that offers: • a perfect playing surface from installation, plus the optimum balance of speed and control • maintains its play characteristics longer than other premium cloths • is durable and less prone to ball marks, tears, holes and bruises • is treated with SpillGuard to protect against spills and stains Milliken SuperPro has a growing reputation for quality and has been selected for the following tournaments: 2008 & 09 2008 & 09 2008 2008 2008 2009 2009 2010 USA Blaze Tour DBU German National Championships BCA generationpool.com Championships Canadian Championships New Zealand Championships SEA Games, Laos East Asian Games, Hong Kong World Team Cup, Hanover, Germany SuperPro is also the official and exclusive cloth of the Deutsche Billard Union in... |
|
|
|
|
Displaying 1 to 4 (of 4 products)
Pages: |
|
|
|
|
|
|
|
Any Questions please call +44 (0) 33312 147 147
