Ambersil NC 500 Non-Chlorinated Spray Adhesive.

Technical Data:

Spray adhesive NC 500 is perfect for fixing and bonding a wide range of materials. The product has been formulated without Methylene Chloride or other chlorinated solvents.

Advantages:

• High strength formulation.
• Longer open bond time - allows large areas to be covered before film dries.
• Economical, good coverage.
• Free from chlorinated solvents.

Spray Adhesive HS 300 will provide high-strength bonds in many different areas:

Applications:

• Fabrics (Pool / Snooker table cloth).
• Carpets.
• Flooring.
• Paper.
• Rubber.
• Plastics.
• Fabrics.
• Foam.
• Card.
• Wood.
• Metals.
• Hessian.
• Cork.
• Felt.

Apply an even coating to both surfaces to be bonded from 9” - 12” (25 - 30cm). Wait until the adhesive is tack-dry and bond the surfaces together using firm pressure.
N.B. May affect certain plastics. Always test a small, inconspicuous area before general use. To prevent blockages, invert the can after use and spray to clear the nozzle.

Technical Data:

Appearance: Clear, amber liquid.
Odour: Acetone.
SG @ 25°C: 0.81.
Pressure @ 25°C: 3 Ba. r
Discharge rate: 1.7 g/sec.
Polymer type: Styrene butadiene rubber.
Tack time: Approximately 1-10 minutes.
Bonding time: Approximately 60 minutes. Maximum adhesion in 12/24 hours.
Solubility: Soluble in some solvents, insoluble in water.
Recommended solvents: Amberklene FE10, ME20 and L030.
Flammability: Classified as extremely flammable under CHIP Regulations.
Packaging: 500ml aerosol.

STORAGE:
The product may be stored at normal ambient temperatures and has a shelf life of not less than 36 months with correct storage. Aerosols should always be stored below 50°C, away from direct heat and naked flame.