|
|
|
 |
|
£0.84 Ex VAT
£1.01 Inc VAT
|
| Screw In Black Plastic Rest Feet. Black plastic screw in rest feet to fit cross rests, high spider rest, low spider rest & extended spider. Pack quantity options 4, 50 or 100 plastic rest feet. |
 |
|
£1.69 Ex VAT
£2.03 Inc VAT
|
| Peradon Q-rite. As used by Steve Davis and Dennis Taylor. This small device fits onto most cross rests elevating the cue and simplifying cue over a ball. |
 |
|
£2.12 Ex VAT
£2.54 Inc VAT
|
| Nylon Snooker or Pool Table Rest Heads, Sold Individually or as a Set. Nylon rest heads. Cross rest head, low spider rest head and high spider rest head. |
 |
|
£5.41 Ex VAT
£6.49 Inc VAT
|
| Chrome Snooker Or Pool Table Rest Heads, Sold Individually or as a Set. Chrome rest heads. Cross rest head, low spider rest head and high spider rest head. Supplied complete with feet. Fitting. Rest heads are made with a sharp thread that cuts into the shaft and pulls the rest head tightly into place. If necessary carefully use a utility or modelling knife to trim the shaft end down to size. Thread the rest head clockwise into place. There should be no need to force the rest head on, if it is too tight remove and trim a little more and then re-fit. |
 |
|
£5.41 Ex VAT
£6.49 Inc VAT
|
| Brass Snooker or Pool Table Rest Heads, Sold Individually or as a Set. Brass rest heads with black plastic feet. Cross rest head, low spider rest head and high spider rest head. Fitting. Rest heads are made with a sharp thread that cuts into the shaft and pulls the rest head tightly into place. If necessary carefully use a utility or modelling knife to trim the shaft end down to size. Thread the rest head clockwise into place. There should be no need to force the rest head on, if it is too tight remove and trim a little more and then re-fit. |
 |
|
£5.83 Ex VAT
£7.00 Inc VAT
|
| Brass Snooker Table Rest Hooks. Brass Snooker Table Rest Hooks suitable for most tables and available in four different types. All of our Brass Snooker Table Rest Hooks are suitable to carry the rest shafts, half butt and full butt rest sets. |
 |
|
£6.66 Ex VAT
£7.99 Inc VAT
|
| Chrome Snooker Table Rest Hooks. Chrome Snooker Table Rest Hooks suitable for most tables and available in three different types. All of our Chrome Snooker Table Rest Hooks are suitable to carry the rest shafts, half butt and full butt rest sets. |
 |
|
£6.66 Ex VAT
£7.99 Inc VAT
|
| Solid Brass Snooker or Pool Table Rest Heads, Sold Individually or as a Set. Solid brass rest heads. Cross rest head, low spider rest head and high spider rest head. Fitting. Rest heads are made with a sharp thread that cuts into the shaft and pulls the rest head tightly into place. If necessary carefully use a utility or modelling knife to trim the shaft end down to size. Thread the rest head clockwise into place. There should be no need to force the rest head on, if it is too tight remove and trim a little more and then re-fit. |
 |
|
£8.08 Ex VAT
£9.70 Inc VAT
|
| London Bridge Rest Head. The London bridge is brought to you buy the same inventor who brought the fantastic Flexi-Rest. Inventor Des Morley has taken two years to perfect the overall design of this fantastic new product. The 2007 World Champion Daryl Peach’s help has been invaluable with the overall playability of the London Bridge e.g. making sure that it was up to making every kind of bridge shot possible and even some not so possible, only then would he be prepared to put his name and reputation to the London Bridge. The London Bridge is very easy to use, and yet simple in design. Its unique grommet design just pushes onto a Jump/Break cue or house cue. The clever sturdy design makes every variation of bridge shot to be played much easier thus increasing your confidence over the shot. When using the London Bridge you have the added advantage of being able to see through the body of the bridge enabling you to see the cueball. Features: Allows you to play shots on the rail. Fits on a 12.5mm to 13.5mm Shaft. Allows play over clusters of balls. Unique breakthrough rubber grommet for easy attachment to your Jump/Break Cue. Gives fantastic rigidity during its many positional options. Small enough to carry in your Cue Case. Endorsed by World Champions Alison Fisher and Darryl Peach. Black rest head Pink rest head |
 |
|
£8.29 Ex VAT
£9.95 Inc VAT
|
| ACCU-REST Have you ever had trouble cueing over the pack? Or maybe been in an awkward position, tight on the rail and hampered by other balls? Only to realise the Club you are playing in doesn´t have the necessary equipment to aid your shot? Then you´re not alone. A lot of Club´s up and down the country and all over the world do not have sufficient equipment to allow the serious player to achieve their full potential. That´s where the idea for the ACCU-REST kit came from. The kit is both durable and portable, fitting in to most cases and has the range required allowing you to play any of those shots that you may have had to choose against in the past. The kit really can be the difference between winning and losing. Part of the kit is similar to the swan neck, but allows greater visibility and manoeuvrability. Thus allowing you to get right in on the shot, seeing exactly what you are doing and where you are going to strike the cue ball. Ultimately giving you more control and accuracy. The kit even allows you to play the almost impossible swerve shot from the middle of the table! The other part of the kit is the "twin headed side rest". The rest allows you to hover over the side of the cushion allowing you to play shots that would have before been out of range of the normal rest. This is where the kit really comes in to its own as there is nothing else on the market that allows you to do what this rest does. The kit is highly rated by... |
 |
|
£9.99 Ex VAT
£11.99 Inc VAT
|
| Maple Snooker or Pool Table Rest Shaft. Maple tapered rest shaft. Suited to fit cross rests, high spider rest, low spider rest & extended spider. Dimensions (Averaged): Length: 57 inches / 144.7 cm Fitting. Rest heads are made with a sharp thread that cuts into the shaft and pulls the rest head tightly into place. If necessary carefully use a utility or modelling knife to trim the shaft end down to size. Thread the rest head clockwise into place. There should be no need to force the rest head on, if it is too tight remove and trim a little more and then re-fit. |
 |
|
£13.62 Ex VAT
£16.34 Inc VAT
|
| Solid Chrome Swan Neck Rest, Chrome Extended Spider, Sold Individually or as a Set. Solid Chrome swan neck rest. Chrome extended spider with black plastic feet. Fitting. Rest heads are made with a sharp thread that cuts into the shaft and pulls the rest head tightly into place. If necessary carefully use a utility or modelling knife to trim the shaft end down to size. Thread the rest head clockwise into place. There should be no need to force the rest head on, if it is too tight remove and trim a little more and then re-fit. |
 |
|
£13.62 Ex VAT
£16.34 Inc VAT
|
| Solid Brass Swan Neck Rest, Brass Extended Spider, Sold Individually or as a Set. Solid brass swan neck rest. Brass extended spider with black plastic feet. Fitting. Rest heads are made with a sharp thread that cuts into the shaft and pulls the rest head tightly into place. If necessary carefully use a utility or modelling knife to trim the shaft end down to size. Thread the rest head clockwise into place. There should be no need to force the rest head on, if it is too tight remove and trim a little more and then re-fit. |
 |
|
£14.16 Ex VAT
£16.99 Inc VAT
|
| Ash Snooker or Pool Table Rest Shaft. Ash tapered rest shaft. Suited to fit cross rests, high spider rest, low spider rest & extended spider. Dimensions (Averaged): Length: 57 inches / 144.7 cm. Fitting. Rest heads are made with a sharp thread that cuts into the shaft and pulls the rest head tightly into place. If necessary carefully use a utility or modelling knife to trim the shaft end down to size. Thread the rest head clockwise into place. There should be no need to force the rest head on, if it is too tight remove and trim a little more and then re-fit. |
 |
|
£15.83 Ex VAT
£19.00 Inc VAT
|
| Black Snooker or Pool Table Rest Shaft. Black tapered rest shaft. Suited to fit cross rests, high spider rest, low spider rest & extended spider. Dimensions (Averaged): Length: 60 inches / 152 cm Fitting. Rest heads are made with a sharp thread that cuts into the shaft and pulls the rest head tightly into place. If necessary carefully use a utility or modelling knife to trim the shaft end down to size. Thread the rest head clockwise into place. There should be no need to force the rest head on, if it is too tight remove and trim a little more and then re-fit. This rest shaft looks great with any of the chrome rest-heads attached. |
 |
|
£20.42 Ex VAT
£24.50 Inc VAT
|
| The Flexi-Rest. The Flexi-Rest is a modern and unique rest designed to solve all problem shots when playing snooker or pool. The difference between the Flexi-Rest and all other rests is that the Flexi-Rest is not static. It is flexible, enabling a player to bend the rest in-between, over and around any obstructing balls during the course of a game. The Flexi-Rest is bendable, but once in the required position, is also ridged enough to take the weight and power of a cue while executing a shot. This one rest head replaces the cross rest, spider, high spider, extended spider and swan neck. Used at the World Pool Masters, Mosconi Cup, World Pool Championships, World of Pool, World Pool Trickshot Masters and Premier League Snooker. |
 |
|
£40.09 Ex VAT
£48.11 Inc VAT
|
| Maple Half Butt Cue with Shafts for Half Butt Rest. Maple tapered half butt shaft & half butt cue already tipped and ready to use. Dimensions (Averaged): Length: 92 inches / 233.7 cm Fitting. Rest heads are made with a sharp thread that cuts into the shaft and pulls the rest head tightly into place. If necessary carefully use a utility or modelling knife to trim the shaft end down to size. Thread the rest head clockwise into place. There should be no need to force the rest head on, if it is too tight remove and trim a little more and then re-fit. |
 |
|
£40.43 Ex VAT
£48.52 Inc VAT
|
| Maple Half Butt Cue with Shafts for Half Butt Rest. Maple tapered half butt shaft & half butt cue already tipped and ready to use. Dimensions (Averaged): Length: 92 inches / 233.7 cm. Fitting. Rest heads are made with a sharp thread that cuts into the shaft and pulls the rest head tightly into place. If necessary carefully use a utility or modelling knife to trim the shaft end down to size. Thread the rest head clockwise into place. There should be no need to force the rest head on, if it is too tight remove and trim a little more and then re-fit. |
 |
|
£56.94 Ex VAT
£68.33 Inc VAT
|
| Ash Full Butt Cue with Shafts for Full Butt Rest. Ash tapered full butt shaft & full butt cue already tipped and ready to use. Dimensions (Averaged): Length: 108 inches / 274.3 cm. Fitting. Rest heads are made with a sharp thread that cuts into the shaft and pulls the rest head tightly into place. If necessary carefully use a utility or modelling knife to trim the shaft end down to size. Thread the rest head clockwise into place. There should be no need to force the rest head on, if it is too tight remove and trim a little more and then re-fit. |
|
|
£56.94 Ex VAT
£68.33 Inc VAT
|
| Ash Half Butt Cue with Shafts for Half Butt Rest. Ash tapered half butt shaft & half butt cue already tipped and ready to use. Dimensions (Averaged): Length: 92 inches / 233.7 cm. Fitting. Rest heads are made with a sharp thread that cuts into the shaft and pulls the rest head tightly into place. If necessary carefully use a utility or modelling knife to trim the shaft end down to size. Thread the rest head clockwise into place. There should be no need to force the rest head on, if it is too tight remove and trim a little more and then re-fit. |
Any Questions please call +44 (0) 33312 147 147
